Kismet is capable of running on OSX and capturing data on OSX natively.
Kismet should build on OSX directly, but requires some libraries be installed.
Install XCode from the Apple App Store. You may be prompted, during the course of installing MacPorts, to install other components of XCode and the XCode command line utilities.
Install a ports library; for example:
Install the needed external libraries; If prompted to install other necessary libraries or tools, of course say
$ sudo port install libmicrohttpd pcre protobuf-c protobuf-cpp
$ brew install libmicrohttpd pcre protobuf protobuf-c
Install any desired external tools; to capture sensors using a rtl-sdr USB device and the
rtl_433 tool, you will need a USB device, the
librtlsdr library, and the
rtl_433 tool set up. You should be able to follow the guides on https://www.rtl-sdr.com for more information.
Install python2 and
pip is the Python package manager; depending on your configuration it may be called
py-pip; for example:
$ sudo port install py-pip
Kismet uses Python to capture from
rtl_433 and for other plugin functions; installing
pip will allow Python to fetch additional libraries automatically.
Make a source dir for Kismet (optional, but recommended)
$ mkdir src
Get the Kismet code
$ git clone https://www.kismetwireless.net/git/kismet.git
Configure Kismet. You'll likely need to pass some options to tell the OSX compilers where to find the libraries and headers:
$ CFLAGS="-I/opt/local/include" LDFLAGS="-L/opt/local/lib" CPPFLAGS="-I/opt/local/include" ./configure
There will be some warnings - generally they can be ignored. As the OSX port evolves, the warnings will be cleaned up.
$ sudo make suidinstall
make suidinstall will install the Kismet helpers as suid-root, executeable by users in the
staff group in OSX. There is more information on the suidinstall method in the Kismet README; in generally it increases the overall Kismet security by allowing you to launch Kismet as a normal user; only the packet capture tools will run as root.
Kismet supports both local capture (from CoreWLAN / Apple wireless devices) and remote capture (from embedded Linux devices, etc, over the network).
Kismet will (currently) work only with Wi-Fi devices supported by the built-in Apple drivers; it will not work with USB devices; They use vendor drivers which do not support monitor mode or provide control APIs.
Kismet will list the available Wi-Fi sources in the
Datasources panel of the UI, or sources can be configured from the command line or the Kismet config files.
$ kismet -c en1
For more information on configuring Kismet in general, as well as logging formats and other Kismet features, be sure to check out the normal Kismet README file.
The Kismet web UI should be accessible on the OSX system by going to
http://localhost:2501 with your browser.
The Kismet web password is stored in
~/.kismet/kismet_httpd.conf in the home directory of the user who is running Kismet.